製品情報モノクログラフィックモジュール 128x64ドット

図面

PIN NO.	Symbol	Level	Description
1	VSS	0V	Power supply for logic GND
2	Vdd	3.3V	Power supply for logic
3	VO	O	Contrast adjustment
4	/RES	I	When /RES is set to “L,” the settings are initialized. The reset operation is performed by the /RES signal level.
5	/CS	I	This is the chip select signal
6	RS	I	This is connect to the least significant bit of the normal MPU address bus, and it determines whether the data bits are data or a command. R“H”: Indicates that D0 to D7 are display data. R“L”: Indicates that D0 to D7 are control data.
7	/WR	I	Write signal
8	/RD	I	Read signal
9	DB0	I/O	Data bus
10	DB0	I/O	Data bus
11	DB0	I/O	Data bus
12	DB0	I/O	Data bus
13	DB0	I/O	Data bus
14	DB0	I/O	Data bus
15	DB0	I/O	Data bus
16	DB0	I/O	Data bus
17	A	I	Power supply for B/L (+)
18	K	I	Power supply for B/L (-)

「モノクログラフィックモジュール 128x64ドット」のご相談やお見積もりをご希望のお客様は、こちらのフォームをご利用ください。