有機ELグラフィックモジュール No.46 (128 x 64ドット)

製品情報有機ELグラフィックモジュール No.46 (128 x 64ドット)

図面

特長

  • VAサイズ:1.3インチ
  • 画素数:128 x 64ドット
  • 表示色:White
  • インターフェース:68/80系/SPI/I2C
  • 内蔵コントローラ:SH1107相当品
  • 接続タイプ:直付け
  • RoHS対応

機械的仕様

  • 外形サイズ:47.8(W) x 17.1(W) x1.43(T) mm
  • ビューイングエリア:30.42(W) x 15.7(H) mm
  • アクティブエリア:29.42(W) x 14.7(H) mm
  • ドットサイズ:0.55 x 0.75 mm
  • ドットピッチ:0.23 x 0.23 mm

電気的特性

供給電圧:VDD=1.65V (Min.)
VDD=3.0V (Typ.)
VDD=3.5V (Max.)

I/Fピン配置

PIN NO.SymbolFunction
1 NC No Connection.
2 VSS Ground.
3 VCOMH This is a pad for the voltage output high level for common signals. A capacitor should be connected between this pad and VSS.
4 SW This is an output pad driving the gate of the external NMOS of the booster circuit.
5 AVDD 2.4 - 3.5V power supply for the internal buffer of the DC-DC voltage converter.
6 VBREF 3.0 – 4.2V power supply pad for Power supply for charge pump circuit. This pin can be disconnected or connect to VDD1 when VPP is supplied externally
7 FB This is a feedback resistor input pad for the booster circuit. It is used to adjust the booster output voltage level, VPP
8 SENSE This is a source current pad of the external NMOS of the booster circuit.
9 VSS Ground.
10 VDD 1.65 - 3.5V Power supply for logic and input.
11 IM0 These are the MPU interface mode select pads.
12 IM1
13 IM2
14 IREF This is a segment current pad and VSS. Set the current at 12.5mA. reference pad. A resistor should be connected between this
15 CSB This pad is the chip select input. When CSB= “L”, then the chip select becomes active, and data/command I/O is enabled.
16 RESB This is a reset signal input pad. When RESB is set to “L”, the settings are initialized. The reset operation is performed by the RESB signal level.
17 A0 This is the Data/Command control pad that determines whether the data bits are data or a command.
18 WRB This is a MPU interface input pad.
19 RDB This is a MPU interface input pad.
20-27 D0-D7 This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
28 VPP OLED panel power supply. Generated by internal charge pump. Connect to capacitor. It could be supplied externally.
29 VSS Ground.
30 NC No Connection.

「有機ELグラフィックモジュール No.46 (128 x 64ドット)」のご相談やお見積もりをご希望のお客様は、こちらのフォームをご利用ください。

TOPへ戻る