製品情報有機ELグラフィックモジュール No.45 (128 x 64ドット）

図面

PIN NO.	Symbol	Function
1,13	NC	No Connection.
2	VSS	This is a Ground pin.
3	D1	Serial data input PIN
4	D0	Serial clock input PIN
5	A0	This pin is Data/Command control pin connecting to the MCU.
6	RES	This pin is reset signal input.
7	CS	This pin is the chip select input connecting to the MCU.
8	IREF	This pin is the segment output current reference pin. A resistor should be connected between this pin and VSS.
9	IM1	MCU bus interface selection pins.
10	VDD	VDD must always set to be equivalent to or higher than VDD.
11	VCOM	COM signal deselcted voltage level. A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.
12	VPP	Power supply for panel driving voltage.

「有機ELグラフィックモジュール No.45 (128 x 64ドット）」のご相談やお見積もりをご希望のお客様は、こちらのフォームをご利用ください。